Frame; Deve. Tie Plate Removal (Pl12.1.4) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.15 Frame

3.2.15.1 DEVE. TIE PLATE Removal (PL12.1.4)

1. Remove the FRONT COVER ASSEMBLY. (See Section 3.2.4.1.)
2. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
3. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
4. Remove the TENSION LEVER. (See Section 3.2.11.1.)
5. Remove the INNER COVER ASSEMBLY. (See Section 3.2.4.3.)
6. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
7. Remove the EXIT UPPER ASSEMBLY. (See Section 3.2.13.2.)
8. Remove the EXIT LOWER ASSEMBLY. (See Section 3.2.13.3.)
9. Remove the FRONT COVER SWITCH L. (See Section 3.2.16.8.)
10. Remove the FRAME CLAMP-PS.
NOTE: In the following step, be careful not to damage the connector
connected to the rear frame in the printer by touching it with
the DEVE. TIE PLATE.
11. Remove 4 screws (black, cup head, 8mm) securing the DEVE. TIE
PLATE, and lift the DEVE. TIE PLATE up to remove.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-133. DEVE. TIE PLATE Removal
Revision A
3-107