Epson ColorPage EPL-C8200 Service Manual page 53

EPSON ColorPage EPL-C8200
Table 1-32. Panel Setting Menu List (7/8)
Menu Item
FX Menu Font
Pitch
Condensed
T. Margin
Text
CGTable
Country
Auto CR
Auto LF
Bit Image
ZeroChar
1239X Menu Font
Pitch
Code Page
T. Margin
Text
Auto CR
Auto LF
Alt. Graphics
Bit Image
ZeroChar
Character Set
*27
Support HDD Format
*25
Menu
*27*4
PS3 HDD Init
Chapter 1 Product Descriptions
Value
Courier , Prestige, Roman, Sans serif, Script,
Orator S, OCR A, OCR B
10 cpi , 12 cpi,15 cpi, Prop.
Off , On
0.40 0.50 1.50 inch step 0.05 inch
*10 *9
1 62 66 available (Max:111) Lines
PcUSA , Italic, PcMultilin, PcPortugue,
PcCanFrenc, PcNordic, PcTurkish2,
PcE.Europe, BpBRASCII, BpAbicomp, 8859-
15ISO, PcEur858
USA , France, Germany, UK, Denmark,
Sweden, Italy, Spain1, Japan, Norway,
Denmark2, Spain2, LatinAmeric
On , Off
Off, On
Dark , Light, Barcode
0 , 0
Courier , Prestige, Gothic, Orator, Script,
Presentor, Sans serif
10 cpi, 12cpi,15cpi, 17cpi, 20cpi, 24cpi, Prop.
437 , 850, 860, 863, 865
0.30 0.40 1.50 inch step 0.05 inch
*10 *9
1 63 67 available (Max:111) Lines
Off , On
Off, On
Off, On
Dark , Light
0 , 0
*10 *9
1 , 2
Table 1-33. Panel Setting Menu List (8/8)
Menu Item
Maintenance Engine Status Sheet
*26
Menu
2nd BTR Clear
IBT Cleaner Clear
Fuser Counter Clear
Total Count Clear
Error Log Clear
*1: Appears only when activated with "Setup Menu" > "Interface" set to
"Auto" or "Network".
*2: Appears only when an Type-B level 3 is installed.
*3: Appears only when activated with "Setup Menu" > "Interface" set to
"Auto" or "AUX".
*4: Appears only when an optional PostScript3 module is installed.
*5: Indicated neither on the panel nor status sheet. Can be set in EJL.
Not intended for users.
*6: Appears only when an optional Type-B I/F card.
*7: Appears only when an optional Large Capacity Paper Unit or 500-
Sheet Paper Cassette Unit is installed.
*8: Appears only when an optional Large Capacity Paper Unit is
installed.
*9: Factory default for the European, Pacific/Russian, Taiwanese,
Chinese, and Korean models.
*10: Factory default for the North/South American models.
*11: Indicated neither on the panel nor status sheet. Can be set in EJL
or PJL.
*12: Effective only in the LJ4, ESC/Page, or ESC/Page-Color modes.
*13: Indicated only. Not to be changed.
*14: Appears only for the Taiwanese, Chinese, and Korean models.
*15: Appears only for the North/South American models.
*16: STANDBYTIME command for EJL is also supported. Default is 60
(minutes).
Revision A
Value
1-38