Paper Exit - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

2.5.12 Paper Exit

1. Exit-2 Roll Assembly
The Exit-2 Roll Assembly transfers the fused paper to the Top
Cover Assembly (face down paper ejection).
2. Exit-3 Roll Assembly
The Exit-3 Roll Assembly transfers the fused paper to the Top
Cover Assembly (face down paper ejection).
3. Exit Chute Switch
The Exit Chute Switch detects the open/close of the Exit Upper
Assembly. If open, the Exit Chute Switch halts the printer operation
(a safety feature). (The Exit Chute Switch is turned ON when the rib
of the Exit Upper Assembly is pushed in.)
4. Fuser Fan
The Fuser Fan exhausts the heat from the Fuser Assembly to
prevent overheating in the printer.
5. Top Exit Sensor
The Top Exit Sensor detects the fused paper's pass status. The
sensor detects the paper pass status from the position change of
the actuator.
Chapter 2 Operating Principles
Figure 2-37. Paper Exit
Revision A
2-39