Regi. Brake Clutch Removal (Pl5.2.20) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.8.8 REGI. BRAKE CLUTCH Removal (PL5.2.20)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MAIN P/H ASSEMBLY. (See Section 3.2.8.1.)
NOTE: In the following step, hold the REGI. CHUTE ASSEMBLY to
keep it closed while turning over the MAIN P/H ASSEMBLY.
4. Disconnect the connector (P/J109) for the REGI. BRAKE CLUTCH
from the back of the MAIN P/H ASSEMBLY and release the
harness.
Figure 3-51. REGI. BRAKE CLUTCH Removal (1/2)
5. Remove 3 screws (gold tapped, 8mm) securing the REGI. BRAKE
ASSEMBLY, and remove the REGI. BRAKE ASSEMBLY.
6. Remove 2 E-rings; one securing the REGI. BRAKE CLUTCH and
the other securing the REGI BRAKE GEAR.
Chapter 3 Disassembly and Assembly/Adjustment
7. Remove the REGI. BRAKE CLUTCH and REGI. BRAKE GEAR
from the REGI. BRAKE BRACKET.
Figure 3-52. REGI. BRAKE CLUTCH Removal (2/2)
Revision A
3-45