Front Cover Switch L Removal (Pl13.2.4) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.16.8 FRONT COVER SWITCH L Removal (PL13.2.4)

1. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
2. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
3. Remove the TENSION LEVER. (See Section 3.2.11.1.)
4. Remove the INNER COVER ASSEMBLY. (See Section 3.2.4.3.)
5. Disconnect the connector (P/J197) for the FRONT COVER
SWITCH L and release the harness from the hooks.
6. Remove the screw (black, cup head, 6mm) securing the FRONT
COVER SWITCH L. Then pull out the harness through the cutout in
the frame and remove the FRONT COVER SWITCH L.
When installing the FRONT COVER SWITCH L, make
sure the harness is properly routed.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-141. FRONT COVER SWITCH L Removal
Revision A
3-114