EPSON ColorPage EPL-C8200
FIP-2.31 CLEANER CAM SOLENOID is Defective
Step
Check point
Perform the preliminary inspection.
Parts to inspect:
1
CLEANER CAM SOLENOID, FUSER HARNESS ASSY,
MAIN HARNESS ASSY, MCU PWB
Check:
Power supply to the CLEANER CAM SOLENOID
2
Is the voltage level correct at the pins below?
- P/J18-B5PIN<=>P/J21-2PIN: 24VDC
Check: CLEANER CAM SOLENOID
Does the CLEANER CAM SOLENOID have proper
continuity at the pins below?
3
- J18-B5PIN<=>J18-B4PIN
- 215
Check: FUSER HARNESS ASSY
Does the FUSER HARNESS ASSY have proper
4
continuity at the pins below?
- J73<=> J71PIN
Check: MAIN HARNESS ASSY
Does the MAIN HARNESS ASSY have proper
5
continuity at the pins below?
- P71<=> J18PIN
Chapter 5
Troubleshooting
Remedy
Yes
Replace/reinstall the defective part(s).
Go to Step 3.
Replace the MCU PWB.
Go to Step 5.
Replace the CLEANER CAM
SOLENOID.
No
Go to Step 2.
Go to FIP-2.2 "LVPS 24VDC is
Defective".
Go to Step 4.
Replace the FUSER HARNESS ASSY.
Replace the MAIN HARNESS ASSY.
Revision A
5-100