Control Panel Messages
Status message list
Messages
Form Feed
Ready
Reset
Reset All
Reset to Save
Self Test
Standby Level X
(X = 1 or 2)
Warming Up
Writing DIMM A
Description
The printer is feeding paper.
The printer is ready to print.
The printer's current interface
has been reset and the buffer
is cleared.
All printer settings have been
reset to the user default
configulation, the last settings
that were saved.
You should reset the printer to
save the current settings.
The printer is running a self-
diagnostic program.
The printer is turned on, but is
in energy-saving mode.
The printer is warming up.
The printer is writing the
settings to ROM module A.
Error message list
Messages
Check OHP
Sheet
Check Paper
Size
Exiting Paper
Jam
Exit Cover Open
Feed Jam
Description
You have load transparencies
facing the wrong direction or
with the wrong side up, or you
tried to load a transparency
other than EPSON Color Laser
Transparencies. The printer
stops loading in order to avoid
damage. You must clear any
jammed sheets from the MP
tray and paper path unit.
The paper size setting is
different from the size loaded
in the printer. Check to see if
the correct size of paper is
loaded in the tray; then press
the Continue button.
Paper is jammed at an
ejection area like the face-up
tray.
The output path cover is open.
Close it.
Paper is jammed at a loading
entrance area like the paper
cassette or MP tray.
11