Epson ColorPage EPL-C8200 Service Manual page 315

EPSON ColorPage EPL-C8200

SSJAM status parameters
NOTE:The following parameters have been defined by bits.
Table 4-57. SSJAM Status Parameters
SSJAM status code: C4
Data
STS JAM
(Bit)
Paper jam in the Exit Upper
7 Assembly/Exit Lower
Assembly
Paper jam in the Main P/H
6
Assembly
Paper jam in the Fuser
5
Assembly
4 -
3 -
2 Size mismatch
OHP Front/Back: wrong
1
setting
Static jam (remaining paper) -
0
> (STSPAPER)
Chapter 4 Diagnostics
STS PAPER
Remaining paper in the Exit Upper
Assembly/Exit Lower Assembly
Remaining paper in the Main P/H
Assembly
Remaining paper in the Fuser
Assembly
-
-
-
-
-

SSHW status parameters
NOTE:The following parameters have been defined by bits.
Table 4-58. SSHW Status Parameters (1/2)
SSHW status code: C5
Data
STSHW1
(Bit)
7 -
6 Option error
5 2nd BTR error
4 Fuser warm-up error
3 Oil Roll Assembly: Not installed
2 Main Fuser Assembly error
1 -
0 High density error
Table 4-59. SSHW Status Parameters (2/2)
SSHW status code: C5
Data
STSHW3
(Bit)
7 High density error
6 Low density error
5 P/H Motor Assembly error
4 Environment Sensor error
3 Rotary Motor Assembly error
2 Fuser low temperature error
1 Waste Toner Box: Not installed.
0 MCU PWB error
Revision A
STSHW2
Fuser overheat error
Ross Assembly error
Process Motor Assembly error
Recognition function error
Paper Cassette 2 is not set.
Paper Cassette 3 is not set.
Heater error
Paper Cassette 1 is not set.
STSHW4
Toner Cartridge Y: Not installed.
Toner Cartridge M: Not installed.
Toner Cartridge C: Not installed.
Toner Cartridge Bk: Not installed.
PCDC error
Contamination ADC Sensor
Paper Cassette 4 is not set.
-
4-51