Top Exit Sensor Removal (Pl10.2.12); Exit Chute Switch Removal (Pl10.2.13) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.13.7 TOP EXIT SENSOR Removal (PL10.2.12)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
3. Remove the FUSER ASSEMBLY with the EXIT TRAY ASSEMBLY
and the OIL ROLL ASSEMBLY on it. (See Section 3.2.12.2.)
4. Remove the EXIT UPPER ASSEMBLY. (See Section 3.2.13.2.)
5. Remove the EXIT LOWER ASSEMBLY. (See Section 3.2.13.3.)
6. Disconnect the connector (P/J165) for the TOP EXIT SENSOR.
7. Release the hooks securing the TOP EXIT SENSOR and remove
the TOP EXIT SENSOR.
Figure 3-120. TOP EXIT SENSOR Removal
Chapter 3 Disassembly and Assembly/Adjustment

3.2.13.8 EXIT CHUTE SWITCH Removal (PL10.2.13)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
3. Remove the FUSER ASSEMBLY with the EXIT TRAY ASSEMBLY
and the OIL ROLL ASSEMBLY on it. (See Section 3.2.12.2.)
4. Remove the EXIT UPPER ASSEMBLY. (See Section 3.2.13.2.)
5. Remove the EXIT LOWER ASSEMBLY. (See Section 3.2.13.3.)
6. Disconnect the connector (P/J166) for the EXIT CHUTE SWITCH.
7. Release the hooks securing the EXIT CHUTE SWITCH and remove
the EXIT CHUTE SWITCH.
Figure 3-121. EXIT CHUTE SWITCH Removal
Revision A
3-98