Epson ColorPage EPL-C8200 Service Manual page 55

EPSON ColorPage EPL-C8200
3. Out Bin
Selects the ejection tray.
Face-down: Ejects into face-down tray. Note that for certain
paper sizes and types, the printer will force
ejection into the face-up tray regardless of this
setting.
Face-up: Ejects into face-up tray.
4. Quantity
Number of copies can be set for collating. Since it has priority over
the setting made for "Copies", the value set for " Copies " is ignored
when the selected number of copies for "Quantity" is two or more.
This setting is made only by the PJL, EJL, ESC/Page, or ESC/
PageColor mode only. The setting value is not stored. If one-job
data is too large, the printer indicates "Collate was disabled" and
prints one copy. In the ESC/Page or Esc/PageColor mode, if a HDD
unit is not installed, the printer always operates with "Quantity" set
to "1".
5. Manual Feed
Determines whether or not to generate the message "Manual Feed
xxx yyyy" before printing.
Off: Manual Feed is disabled.
On: Manual Feed is abled. "Check Paper Size" error is not
generated regardless of the setting for "Size Ignore"
for "Config Menu". With "Manual Feed" on, the printer
prints in 1-UP mode only.
Chapter 1 Product Descriptions
Tray Menu
1. MP Type
Specifies the type of the paper set in the MP tray.
Plain: Ordinal paper such as copy paper
Letterhead: Letter paper
Bond: Bond paper
Recycled:
Recycled paper
Color: Color paper
Trnsprncy: OHP film
Labels: Labels
When "Paper Size" = "Normal" and "Paper Source" = "Auto", the
printer refers to the values set for this item to search the paper
sources that hold the selected paper type and then the one that also
matches the selected paper size.


Envelopes are always fed from the MP tray.


When "Paper Type" = "Thick" or "Trnsprncy", paper is always
fed from the MP tray.


When "Paper Type" = "Normal", the printer refers to the values
to determine the printing speed.


Type of paper that is selected at paper source selection is only
designated by the ESC/Page, ESC/PageColor, or LJ4
command.
2. LC1 - 4 Type
Specifies the types of paper that are set in LC1 - LC4. Available
setting values are "Plain", "Letterhead", "Bond", "Recycled", and
"Color". See
MP Type" above for details.
Revision A
1-40