Ros Assembly Removal (Pl6.1.1) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.9.3 ROS ASSEMBLY Removal (PL6.1.1)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove 8 screws (silver, cup head, 6mm) securing the ROS
COVER and remove the ROS COVER.
3. Disconnect 3 connectors (P/J121, 122, and 124) for the ROS
ASSEMBLY.
NOTE: In the following step, ROS ASSEMBLY is kept connected to
the XL RAIL ASSEMBLY with the harness. Do not move the
ROS ASSEMBLY to away from the XL RAIL ASSEMBLY.
NOTE: In the following steps, keep your hands away from the
window part of the ROS ASSEMBLY, where laser beam is
emitted, and other functioning parts such as motor shaft.
4. Remove 4 screws (black, cup head, 12mm) securing the ROS
ASSEMBLY and remove the ROS ASSEMBLY from the printer.
5. Remove the connector (P/J123) at bottom of the ROS ASSEMBLY
and remove the ROS ASSEMBLY carefully.


Keep the harness away from the motor shaft of the
Scanner assembly in the ROS ASSEMBLY.


Do not get the harnesses caught between the ROS
ASSEMBLY and the frame.
Chapter 3 Disassembly and Assembly/Adjustment
Window part
Figure 3-60. ROS ASSEMBLY Removal (2/2)
Revision A
3-52