Controller Specifications - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

1.2.12 Controller Specifications


CPU: R5000 (200MHz)

Enhancement technologies:
AcuLaser Color Halftoning (monochrome print)
RIT, CRIT

RAM: SDRAM 64-bit-wide DIMM (168-pin, 3.3V)
Maximum: 256MB
3 RAM slots, including 1 used for the standard
RAM
Standard: 64MB
Expansion: 32MB, 64MB, 128MB, 256MB

ROM: 32-bit-wide
Program: 4MB (ROM DIMM)
Font: 4MB

Expansion ROM: 3 slots (ROM DIMM slots)
Slot A, B: Font ROM module, PostScript3 module, CM table
Slot C: NLSP font ROM module only

Panel: 1-line 20-Character LCD, 6 LEDs, 8 switches

Interfaces:
Standard: Parallel, 1ch
1EEE-1284-compliant bidirectional
B-type connector
Compatibility
Nibble
ECP
Ethernet
100Base/TX, 10Base/T, 1ch
Optional: Type-B - 1 slots (for level 3)

Printer settings: Made through the panel setting mode, EJL
commands, and MIB
Chapter 1 Product Descriptions

Printer modes:
Standard: ESC/Page-Color, ESC/Page (B/W), LJ4 (B/W), GL2
(B/W), ESCP2 (B/W), FX (B/W), 1239X (B/W)
Optional: Postscript3 (PostScript3 module, Peacock-B)
Others: EJL, PJL, RCC

Supplementary software:
Status sheet
Network Status Sheet
Opt I/F Status Sheet (with a Type-B level 3 I/F installed)
Font Sample (each mode)
Hex dump
Support Mode
Maintenance mode (Engine Status Sheet)
Revision A
1-20