Control Panel Messages; Status Message List; Error Message List - Epson ColorPage 8000 Quick Reference Manual

Control Panel Messages

Control Panel Messages
For a complete list of status messages, see your Printer Guide.

Status message list

Messages
Form Feed
Ready
Reset
Reset All
Reset to Save
Self Test
Standby Level X
(X = 1 or 2)
Warming Up
For a complete list of error messages, see your Printer Guide.

Error message list

Messages
Check Paper Size
Irregular Density
Image Optimum
Maintenance Req
<error number>
Description
The printer is feeding paper.
The printer is ready to print.
The printer's current interface has been reset and the buffer is cleared.
All printer settings have been reset to the user default configuration, the last settings that
were saved.
You should reset the printer to save the current settings.
The printer is running a self-diagnostic program.
The printer is turned on, but is in energy-saving mode.
The printer is warming up.
Description
The paper size setting is different from
the size loaded in the printer.
The document density is too great.
The printer stops loading paper.
There printer doesn't have enough
memory to print the page at the
specified resolution. The printer
automatically reduces the print quality
so it can continue.
An internal printer part needs
to be replaced.
Action
Make sure the correct size of paper is loaded
in the tray; then press the Continue button.
Clear any jammed paper from the multipurpose
tray paper path.
If the printout is not acceptable, try limiting
the number or size of graphics on the page.
Turn off the Image Optimum setting in the
SelecType Config menu.
Press the Continue button to print. Make sure you
note the error number and contact your dealer.
9
Continue