Wiring Diagram - §10 - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200
A.3.3.10 Wiring Diagram - §10
Table A-32. Wiring Diagram - §10
Signal Name
REGISTRATION PAPER Signal from the Registration Sensor to detect the
SENSED (L) 5VDC paper on the Main P/H Assembly.
FRONT OHP WHITE SENSED Signal from the Front OHP Sensor to detect the
(L) 5VDC white band on the OHP film (for color).
• To detect the front/back of an OHP film, see
REAR OHP WHITE SENSED Signal from the Rear OHP Sensor to detect the
(L) 5VDC white band on the OHP film (for color).
• To detect the front/back of an OHP film, see
PRE-REGISTRATION Control signal to turn the Pre-Registration Clutch
CLUTCH ON (L) 24VDC ON/OFF.
REGISTRATION CLUTCH ON Control signal to turn the Registration Clutch ON/
(L) 24VDC OFF.
REGISTRATION BRAKE Control signal to turn the Registration Brake Clutch
CLUTCH ON (L) 24VDC ON/OFF.
MAIN P/H ASSEMBLY Signal to detection the Main P/H Assembly
SENSED (L) 5VDC connection.


Pre-Registration Clutch coil resistance: 172


Registration Clutch coil resistance: 172


Registration Brake Clutch coil resistance: 172
Chapter A Appendix
Description
"Section 10: 7.3 OHP Side Detection Control".
"Section 10: 7.3 OHP Side Detection"
10% (20 C)
10% (20 C)
10% (20 C)
Revision A
A-51