Epson ColorPage EPL-C8200 Service Manual page 59

EPSON ColorPage EPL-C8200


Network
Normal: Buffer size = 512 KB + 2% of the expanded
memory size
Maximum: Buffer size = 1024 KB + 10% of the expanded
memory size
Minimum: Buffer size = 16 KB (regardless of the installed
memory and number of interfaces)
Note if a HDD unit is installed for the Network I/F, job spool to
the HDD is enabled. With this unit installed, the printer can spool
data whose size is larger than buffer size to the HDD unit.
NOTE: The expanded memory size is defined as follows:
Total installed RAM memory size - Standard RAM size
Network Menu
1. Buffer Size
Sets the memory size allocated to the receive buffer out of the
installed memory. See "Parallel Menu" for details.
AUX Menu
1. Buffer Size
Sets the memory size allocated to the receive buffer out of the
installed memory. See "Parallel Menu" for details.
Maintenance Menu
This menu is indicated and selected only while the Maintenance Mode
is activated by the power-on operation. To eliminate this menu from the
setting menu option, turn the printer off and then back on, and the
printer returns to the normal mode. This menu is intended for servicers
only.
Chapter 1 Product Descriptions
1. Engine Status Sheet
Pressing the Enter button lets the printer print Engine Status Sheet.
lf language data is still in the printer, the sheet will eject. Make sure
the printer is free from any engine related service-call error in the
normal mode (any mode other than the maintenance mode) before
entering and executing the "Maintenance Menu". Engine Status
Sheet will be printed with RIT, toner-save, and resolution remained
in the current settings; and all other set to their factory defaults. The
user-default environment remains in effect after printing is
completed. The indication on the LED blinks while printing is in
progress. The printed sheet will show the count values of the
counter on each unit in the engine. The Engine Status Sheet is
always printed in English regardless of the Setup menu's Lang
setting.
2. 2nd BTR Clear
Resets the 2nd BTR counter. The maintenance engineer must reset
this counter after replacing the 2nd BTR during maintenance.
3. IBT Cleaner Clear
Resets the IBT Cleaner counter. Since IBT Cleaner is not a
periodically replaced part, however, this function is not normally
used.
4. Fuser Counter Clea 
Resets the Fuser Unit counter. The maintenance engineer must
reset this counter after replacing the Fuser Unit.
5. Total Counter Clear
Clears the engine's printer 1 and printer 2 counters to reset "Total
Page" to 0. It also clears "Color Page".
6. Error Log Clear
Clears Error Log List stored to be printed on Engine Status Sheet.
The Error Log lists the latest 20 errors.
Revision A
1-44