EPSON ColorPage EPL-C8200
FIP-2.26 BTR CAM SOLENOID is Defective
Step
Check point
Perform the preliminary inspection.
Parts to inspect:
1
BTR CAM SOLENOID, MAIN HARNESS ASSY, MCU
PWB
Check: Power supply to the BTR CAM SOLENOID
2
Is the voltage level correct at the pins below?
- P/J19-39PIN<=>P/J21-2PIN: 24VDC
Check: BTR CAM SOLENOID electrical continuity
Does the BTR CAM SOLENOID have proper continuity
at the pins below?
3
- Pins: J19-39PIN<=>J19-40PIN
- Resistance: 215
Check: MAIN HARNESS ASSY
Does the MAIN HARNESS ASSY have proper
4
continuity at the pins below?
- J19<=> J63PIN
Chapter 5
Troubleshooting
Yes
Replace/reinstall the defective part(s).
Go to Step 3.
Replace the MCU PWB.
Replace the BTR CAM SOLENOID.
Remedy
No
Go to Step 2.
Go to FIP-2.2 "LVPS 24VDC is
Defective".
Go to Step 4.
Replace the MAIN HARNESS ASSY.
Revision A
5-95