Download Print this page

Xerox DocuColor 250 Online Help Manual page 97

Xerox docucolor 250: reference guide
Hide thumbs Also See for DocuColor 250:

Advertisement

Using the Print Service
Saved jobs
P r od u c t Na me Bo o k N am e
Queue: Displays the designated default queue. If desired,
you can select another queue to print the job by selecting
one from the pull-down menu.
This section provides instructions on reprinting saved jobs and
sample jobs.
Jobs that have been saved to the controller with a destination of
Save can be stored and reprinted at a later time. For additional
information, see: To print a saved job and Multiple job submission.
To print a saved job
To print a saved job:
1. Open the Print Service.
2. From the Directory menu select the UNIX file system or media
location where the job is saved.
3. Select the folder that contains the saved job.
NOTE: Verify the correct Save Location by checking with the
System Administrator or by viewing the Save Location in
Setup menu > System Preferences > Save tab. In some
cases, additional Save directories are created to save specific
jobs by user, by department, or by another categorization.
4. Once the correct Save directory displays, all Saved jobs will
appear in the file list on the right. You can filter the list of jobs
by selecting a specific file type in the File Filter pull-down
menu. The available choices are: Job Ticket, PostScript, PCL,
TIFF, ASCII, PDF, and All.
NOTE: If you do not have a valid PostScript license on the
system, you will not see PostScript in the list of format options.
The default viewing is by Job Ticket because this is the file
type that is used to reprint the entire job. Selecting other file
types does not give you the entire job. For example, if you
select a TIFF file type, the system prints out only the TIFF
image. Selecting the PostScript or PCL file prints the job with
any parameters that have been set up on the system.
NOTE: If you do not have a valid PostScript license on the
system, you will not see PostScript in the list of format options.
5. Perform one of the following steps to access job properties
and print the selected job. See Multiple job submission if you
want to submit more than one job at a time.
-3

Advertisement

loading

This manual is also suitable for:

Docusp