Xerox DocuColor 250 Online Help Manual page 73

The Image Quality Tab
P r od u c t Na me Bo o k N am e
programming in the PDL is lost when the job is printing.
NOTE: If you do not have a valid PostScript license on the
system, you cannot set PostScript options.
• The Layout FAB is not available when accessing saved jobs in
the Print Service. The Layout FAB is available once jobs are
placed in Job Manager using the [Print] button.
The Image Quality tab contains controls that allow you to make
image quality adjustments.
11. Select resolution options:
NOTE: Available options depend on printer configuration.
Select a resolution (dpi). Use the resolution option to
properties using the Image Quality tab
To use the Image Quality tab:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list.
3. Select the Image Quality tab.
4. Select the Options FAB to access controls for Black Overprint,
Anti-aliasing, and Trapping. Once you have edited these
settings, select [Apply]. Your settings will be listed on the FAB.
5. Select the Image Adjustments FAB to adjust lightness,
contrast, saturation, and color cast settings. Once you have
edited these settings, select [Apply]. Your settings will be listed
on the FAB.
6. Select the User TRCs FAB. Any user TRCs that have been
created are accessible through the pull-down menu. You may
also view the curves by selecting [View Curves...]. Once you
have edited these settings, select [Apply]. Your settings will be
listed on the FAB.
7. Select the Halftone FAB. You can select your preferred
halftone from the pull-down menu.
Once you have edited these settings, select [Apply]. Your
settings will be listed on the FAB.
8. Select the Image Resample FAB to select an interpolation
method. Select from the following choices:
• System Specified
• Nearest Neighbor
• Bi-linear
• Smart
Once you have made your choice, select [Apply]. Your setting
Setting job
-55