Xerox DocuColor 250 Online Help Manual page 45
Xerox docucolor 250: reference guide
Hide thumbs
Also See for DocuColor 250:
- User manual (84 pages) ,
- Use manual (2 pages) ,
- Supplementary manual (191 pages)
Advertisement
The Output Tab
P r od u c t Na me Bo o k N am e
3. Select the Stock tab. A graphical representative icon displays
stock characteristics.
4. Select a stock by performing one of the following:
•
You can select a stock from the Name menu. If
Unspecified is selected, you can use the Size/Color FAB,
Type/Weight FAB, and if available, Coating FAB to select
stock properties. If a Named stock is selected, and the
stock attributes are changed, a temporary stock is not
created. The system searches for the stock as specified
when the job is released for printing. The job will not print
until the programmed stock is loaded or stock
programming is changed to a stock that is available to the
printer.
•
To select a stock currently loaded on the printer, select
[Stock List...], click the stock you want to use and select
[OK].
•
Use the Size/Color FAB, Type/Weight FAB, and if
available, Coating FAB to select stock properties. If
[Custom] stock is selected from the Size menu, within the
Size/Color FAB, the width and Height fields become active.
NOTE: Be sure the stock attributes you select are supported
on the printing system.
5. Select [OK], or continue setting job properties.
NOTE: Any custom entries must match the entry programmed
for the paper tray containing the custom paper.
The Output tab allows you to set output options for a particular job.
The Output tab allows you to perform the following tasks:
•
Using the Basic Settings FAB you can set the sides imaged
and collation options.
•
Using the Stapling/Finishing FAB you can set the following
options:
–
Set stapling/finishing options for a job.
–
Determine the output location for a job.
–
Select the order in which the printed pages are delivered to
an output device.
–
Choose whether the prints will be delivered face up or face
down.
–
Set offset stacking and subset output.
•
Using the Slip Sheets FAB: Allows you to enable slip sheets.
•
Set layout, or imposition options using the Layout FAB. See,
Setting Layout Styles and Layout Styles for additional
-27
Advertisement
