Xerox DocuColor 250 Online Help Manual page 336

- 6
Moving a stock into a Color Group
To move a stock into a Color Group:
1. Open Color Manager.
2. Select the Associations tab.
3. Right-click on the desired Color Group. Select [Color Group:
Move Stock]. The Move Stock dialog opens.
4. Select a Color Group from the list into which to move the
stock.
5. Select [OK]. The group will now have a stock associated within
it.
Setting a Color Group as default
To set a Color Group as default:
1. Open Color Manager.
2. Select the Associations tab.
3. Right-click on the desired Color Group. Select [Color Group:
Set Group as default].
4. At the question dialog, select [Yes] if you intend to proceed.
The group will become the default Color Group.
Deleting a Color Group
To delete a Color Group:
1. Open Color Manager.
2. Select the Associations tab.
3. Right-click on the desired Color Group. Select [Color Group:
Delete Group].
NOTE: You cannot delete pre-installed Color Groups. If you
attempt to do so, an error message will appear.
4. At the question dialog, select [Yes] if you intend to proceed.
The group will disappear from the Associations tab.
Exporting a Color Group
To export a Color Group:
1. Open Color Manager.
2. Select the Associations tab.
3. Right-click on the desired Color Group. Select [Color Group:
Export Groups...]. The Export Groups dialog opens.
4. Select the directory into which to export the group.
5. If desired, you can select or deselect the checkbox for the
P r o du c t N am e B o ok N am e