Xerox DocuColor 250 Online Help Manual page 299

P r od u c t Na me Bo o k N am e
the same direction. The horizontal shift remains
independent for both sides. Tandem is best used for head-
to-toe jobs.
5. Select the desired unit of measure (inches, mm).
6. Using the X and Y axis, enter a shift value by using the spin
box or by typing a number in the field.
• When selecting the horizontal (X) image shift, enter a
positive number to move the image away from the left side
of the paper. Enter a negative number to move the image
away from the right side of the paper.
• When selecting the vertical (Y) image shift, enter a positive
number to move the image upward and a negative number
to move the image down.
• Use the Center option to bring both the X and Y values
back to zero (no shift).
NOTE: This list describes the shift behavior on side one. The
shift behavior of side two is determined by the Shift Option
selected in Step 4.
Your selection will appear in the Summary field and on the Image
Shift FAB.
-11