Xerox DocuColor 250 Online Help Manual page 27

P r od u c t Na me Bo o k N am e
Changing Job Properties
You can modify the properties of jobs submitted to the DocuSP
controller by opening Job Manager and performing one of the
following:
• Double-click a particular job to open the Job Properties
window.
• Right-click a job and select [Properties...].
• Select a job and choose [Properties...] from the Job pull-down
menu.
• Select a job and click the [Properties...] icon from the toolbar.
Renaming a job
To rename a job:
1. Open Job Manager.
2. Double-click a job in the Active Jobs or Inactive Jobs field. You
can rename Completed jobs if the Retain PDL Files feature is
enabled. For additional information about Retain PDL Files
see Setting the Job Policy.
3. Left-click at the beginning of the current name in the Job
Name field.
4. Use the <Delete> key to manually delete the name from the
Job Name field.
5. Type the new job name, and select [OK], or continue setting
job properties.
Holding a print job
If a job has been submitted to print and you wish to delay printing
of the job, you can place the job on hold. When a job is held it
needs to process again before it can be printed. As a result, you
can change job properties when a job is in the held state.
To hold a print job:
1. Open Job Manager.
2. Select the job you want to put on hold in the Active or Inactive
Jobs list and perform one of the following:
• Right-click and choose [Hold] from the menu.
• From the Job pull-down menu select [Hold].
• Select the [Hold] icon from the toolbar.
If the job you held was in the Active Jobs list, the job is moved
to the Inactive Jobs list until further action is taken.
-9