Download Print this page

Xerox DocuColor 250 Online Help Manual page 40

Xerox docucolor 250: reference guide
Hide thumbs Also See for DocuColor 250:

Advertisement

- 22
intervals.
Upon user or system intervention on a specific job.
To set the Job Manager refresh interval see: Setting Job
Processing options
8. Select the Administrative Pages FAB. For more information
see Using job Administrative Pages.
9. Select [OK] or continue setting job properties.
Using the Pages/Format FAB
Use the Pages/Format FAB to set the page range you wish to print
or to change the format of a document:
1. To set the page range you want to print:
a. Printing all pages is enabled by default. If you want to print
a selected range of pages clear [Print All Pages].
b. Enter a page range in the [From] and [To] fields.
c. Select [OK] or continue setting job properties.
2. You can change the format of a document after it has been
submitted to the controller. For example, a change from
PostScript to ASCII may be desired in order to print the
PostScript commands.
a. Choose a format from the Format pull-down menu. The
available options vary based on your printer configuration.
NOTE: If you do not have a valid PostScript license on the
system, PostScript is not displayed in the list of format
options.
NOTE: Do not attempt to change one page description
language (PDL) to another, such as PostScript to PCL.
This type of change may cause print errors since the PCL
decomposer cannot interpret the PostScript commands.
b. If the PostScript, PDF, or ASCII job format is selected then
the [Setup...] button becomes active. Click [Setup...] to
access PostScript/PDF and ASCII options. See PostScript/
PDF format settings or ASCII fonts for more information.
NOTE: If you do not have a valid PostScript license on the
system, you will not be able to set PostScript options.
c. Select [OK], or continue setting job properties. Your
selection displays on the Pages/Format FAB.
Using the Destination FAB to print and/or save a job
The default destination is [Print...]. The job is sent to the printer
without being saved. To print and save or save a job perform the
following:
P r o du c t N am e B o ok N am e

Advertisement

loading

This manual is also suitable for:

Docusp