Xerox DocuColor 250 Online Help Manual page 234

Setting up Networking for your printer
- 10
Printer. Gateway availability and configuration is based on your
network environment and the gateways that were loaded and
licensed when the DocuSP software was installed.
This section contains network setup instructions for the various
networking options available on the Multi-Function Printer. To
access many of these functions, you must be logged on as a
System Administrator.
Click the following links to access information for network setup:
• Setting up TCP/IP
• Setting up ADS
• Setting up Ethernet connections
• Setting up LPD
• Entering Proxy Information Into Remote Services
• Enabling HTTP
• Enabling Raw TCP/IP (Port 9100)
• Configuring SNMP
– Accessing SNMP settings
– Enabling SNMP
– Configuring or Viewing SNMP Serial Numbers
– Configuring Common Settings
– Setting or Editing Trap Parameters
• Enabling IPP
• NetWare (NDS and Bindery)
– Setting up the Netware Server
– Setting the Frame Type and Novell Net Number
Accessing Queue Server to configure printer to server
communications
AppleTalk
– Enabling AppleTalk through License Manager
– Viewing or Changing Phase Type and Zone Name
• Microsoft ADS User Names
– Configuring the system to join the domain
– Logging on to the system with ADS user names
• Encoding
– Setting up encoding
• Online Gateway
– Online Gateway Setup
P r o du c t N am e B o ok N am e