Xerox DocuColor 250 Online Help Manual page 104

- 10
NOTE: The "/var/spool/xerox" directory in the mkisofs
command is the location chosen while looking at the Print
Services screen. See step 3 above.
5. Place a blank CD-R or CD-RW in the CDRW Drive.
6. Write to the CD with the cdrw command:
a. Type cd /export/home/xrxusr/cd_image and press
[Enter].
b. Type cdrw -O -i your_image_file and press [Enter].
c. You will see a series of messages:" ...writing track,"
"...finalizing," "...done." The CD will automatically eject
upon completion.
7. Remove the cd_image directory:
a. Type cd /export/home/xrxusr and press [Enter].
b. Type rm -r cd_image and press [Enter].
8. Close the Terminal window.
Printing jobs saved to a CD
To print jobs saved to a CD, perform the following:
1. Insert the CD into the DocuSP controller.
2. Open the Print Services.
3. In Directory, select [CD-RW1] from the pull-down menu. Job
files from CD are displayed.
4. Select the desired job and move it to the appropriate queue for
printing. To move a job, see: Moving a job
Proofing a job
This feature allows you to print a proof copy of a job while
eliminating the need to resubmit the job to print once the content
and/or layout have been verified.
All job attributes apply to Proof jobs except the quantity. The
default print quantity for Proof jobs is 1; however, the default can
be modified in Setup menu > System Preferences by the System
Administrator.
NOTE: Proof jobs will interrupt any currently printing job.
To proof a job:
1. Open the Print Service.
2. Locate the job you want to print.
3. If you want to proof the job before releasing the entire job set,
right-click the job(s) and select [Proof...] or [Proof Selected...].
4. Make any property selections and click [Proof]. The proof
prints immediately.
P r o du c t N am e B o ok N am e