Xerox DocuColor 250 Online Help Manual page 188

- 28
Managing the Stacker list
You can determine the Stacker list display by selecting or
deselecting Stacker list titles. If deselected, the item is removed
from the Stacker list row.
To manage the Stacker list:
1. Open Printer Manager.
2. Select the Stacking tab.
3. From the View menu, select [Columns...].
4. Select the column titles you want to display on the Stacker list.
Deselect column titles that you want to remove from the
Stacker list.
NOTE: The Name column title is read-only and cannot be
deselected.
5. Select [OK]. Your changes are reflected immediately on the
Stacker list.
Setting up and using the stacker
The available stacking options depend on your printer
configuration.
To set up and use the stacker:
1. Open Printer Manager and choose the Stacking tab.
2. If you want your job to be delivered to the stacker, it must be
enabled. If the stacker is not enabled, jobs will only be
processed to the top tray.
• Right-click a stacker and select [Enable] or [Disable].
• Select a stacker and choose [Enable] or [Disable] from the
Stacker menu.
• Select a stacker and choose the [Enable] or [Disable] icon
from the toolbar.
3. Stacker settings consist of stacking mode and unloading. The
available options depend on your printer configuration and
stacker capabilities.
a. Right-click the stacker and choose [Settings...]. The
Setting for All Stackers dialog window opens.
b. The Unload After pull-down menu enables you to select
when you want the stacker or tray to unload. The stacker
will always unload when it is full. To set a specific point at
which the selected stacker or tray should unload choose
an option:
– Job: The system unloads the stacker when the job is
complete.
– Limit: The stacker unloads when it is full.
P r o du c t N am e B o ok N am e