Xerox DocuColor 250 Online Help Manual page 186

The Stacking Tab
Stacker Controls
The Stacker tab menu
- 26
d. Use the Directory pull-down menu to indicate whether the
file should be exported to a location on your native file
system or media. Then use the directory tree to browse to
the specific location to which you wish to export the file.
The complete path appears in the Selection field.
e. Select each profile or device file name that you want to
export.
– To select more than one profile: Press and hold down
the <CTRL> (Control) key while you select all the
desired file names.
– To select multiple files that are adjacent to one another,
press and hold down the <SHIFT> key while selecting
the first and last file names you want to select. This
highlights the first and last file name lines and all lines
in between.
f. Select [OK]. The system confirms that the export was
successful, and the finisher profiles are saved in a file
based on the name of the finisher type with a ".d"
extension, for example, "SBM-1.d".
The Stacking tab allows you to enable and disable the offset
stacker. It also allows you to view and control settings for all
stackers present on your system.
The Stacking tab contains the following fields:
• Name: The name of the stacker.
• Status: Indicates whether the stacker is enabled or disabled.
• Mixed Mode: If enabled, it allows a tray to use more than one
stock type.
• Limit: Displays the stock quantity limits unique to the selected
stacker,
You can access the Stacker menu by performing the following:
• Right-click a stacker.
• Select a stacker and use the Stacker pull-down menu.
• Select a stacker and use the toolbar icons.
The stacking options available depend on your printer
P r o du c t N am e B o ok N am e