Xerox DocuColor 250 Online Help Manual page 158

- 52
3. Select the column titles you want to display on the queue list.
Deselect column titles that you want to remove from the queue
list.
NOTE: The Queue column title is read-only and cannot be
deselected.
4. Select [OK]. Your changes are reflected immediately on the
queue list.
Applying Administration Pages to queues
You can then apply Administrative Page settings to one or more
queues.
1. Open Queue Manager.
2. Select a queue, or to apply Administration Pages to multiple
queues, perform one of the following:
• To select individual queues, press and hold down the
<CTRL> (Control) key and select each individual queue.
• To select multiple queues that are adjacent to one another,
press and hold down the <SHIFT> key and select the first
and last queue names you want to access. This highlights
the first and last queue name lines and all lines in between.
3. Right-click within your selection and select [Administrative
Pages Control...] and select from the following:
• Enable Banner Page:
– Default: Sets the Banner Page for all selected queues
to the default setting.
– Override: Sets the Banner Page for all selected queues
to the override setting.
• Disable Banner Page: Disables the Banner Page on all
selected queues.
– Default: Disables the Banner Page for all selected
queues that were set to the default setting.
– Override: Disables the Banner Page for all selected
queues that were set to the override setting.
• Enable Error Page: Enables the Error Page on all
selected queues.
• Disable Error Page: Disables the Error Page on all
selected queues.
• Enable Attributes Report: Sets all selected queues to
enable the use of the Attribute Report.
– Default: Sets the Attribute Report for all selected
queues to the default setting.
– Override: Sets the Attribute Report for all selected
queues to the override setting.
P r o du c t N am e B o ok N am e