Xerox DocuColor 250 Online Help Manual page 89

P r od u c t Na me Bo o k N am e
2. Double-click a job in the Active or Inactive Jobs list. You can
access Completed jobs if Retain PDL Files is enabled. For
additional information about Retain PDL Files see Setting the
Job Policy.
3. Select the Special Pages tab.
4. Choose the Inserts FAB.
5. Right-click on an insert and select [Delete] or [Delete All]. The
insert is removed form the list.
Creating cover pages
Covers add a finished appearance to jobs and are typically used
for bound, stapled, or stitched jobs. Covers are programmed as
part of a print job; therefore, any printing required on the cover
pages must be submitted as part of the job.
To create cover pages:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list. You can
access Completed jobs if Retain PDL Files is enabled. For
additional information about Retain PDL Files see Setting the
Job Policy.
3. Select the Special Pages tab.
4. Choose the Covers FAB.
5. Choose [Add Front Cover...], or [Add Back Cover...]. The
Covers Properties tabset opens.
6. Select [Make the Front and Back Cover the Same] if you need
to program the same characteristics for both the front and
back covers. Otherwise, the paper stock and sides printed
characteristics must be independently programmed for each
cover within the job.
7. From the Print On pull-down menu select the location where
you want the cover to print:
• Inside Only
• Outside Only
• Both Sides
8. Choose stock characteristics:
• Select a stock from the Name menu. Select [Unspecified]
from the Name menu to set custom stock properties. Make
selections from the Size/Color FAB, Type/Weight FAB, and
Coating FAB.
• You can select a stock and verify the characteristics of the
stock by selecting the [Stock List...], selecting a stock, and
clicking [OK].
• Make selections directly from the Size/Color FAB, Type/
Weight FAB, and Coating FAB. If [Custom] is selected from
-71