Xerox DocuColor 250 Online Help Manual page 113

P r od u c t Na me Bo o k N am e
processed before jobs in queues with lower priorities. If a
priority is not set, a default priority of 50 is assigned to the
queue when it is created. If more than one queue has the
same priority, the queues are processed in repeating
succession.
6. If the Parallel RIP feature is available, select [Enable] or
[Disable].
NOTE: This feature will only appear if your system includes a
valid PPR license. See Setting Job Processing options for
more information
A typical site using Parallel RIP should have at least two
queues: one queue set for Page Parallel workflows and a
second queue set for unknown/non-DSC compliant workflows
such as object caching. This will enable the site to take full
advantage of Parallel RIP and VIPP caching respectively.
NOTE: If Parallel RIP is selected, you will not be able to select
VI Object cache options, and if VI Object Cache is selected,
Parallel RIP is disabled automatically.
The queue set up for Parallel RIP should be set to Protected
PostScript and Parallel RIP enabled.
Also, if desired, select the Convert PostScript to PDF
checkbox.
NOTE: This step is important for PPR users that want to take
advantage of the Page Parallel feature but are unable to use
conforming PostScript files (e.g. DSC and Page
Independence).
7. Make extended option selections using the following tabs:
• The Settings Tab: The Settings tab contains queue
properties FABs.
• The Stock Tab: Select the queue default paper stock.
• The Output Tab: Allows you to select queue output options.
• The Image Quality Tab: Contains features that enable you
enable to set functions that enhance the quality of the
printed image based on the type of file being printed and
the fonts being used. See also, Setting Color Image
Quality Options for a Queue for additional information.
• The Image Edit Tab: Presents features that allow original
images to be modified for output.
• The PDL Settings Tab: Select decomposer (processing)
options.
NOTE: If you do not have a valid PostScript license on the
system, you will not see PostScript in the list of format options.
8. Select [Add Queue] to complete the new queue setup.
9. Select [Close] to exit the New Queue dialog
-7