Xerox DocuColor 250 Online Help Manual page 138

- 32
• Saturation
– controls the strength or purity of the color in the printer's
gamut
– can be set to the desired level +/-100 units using the spin
box
• Color Cast
– these adjustments provide the user the ability to decrease
or increase the amount of any single color. Moving the
slider bar toward any one color increases the amount of
that color by decreasing the amount of its opposite.
These adjustments are:
– Cyan versus Red
– Magenta versus Green
– Yellow versus Blue
User TRCs
The User TRCs FAB provides the ability to select and apply user
TRCs that have been created within Color Manager.
To select User TRCs:
1. Open Queue Manager.
2. Double-click a queue in the Queues list.
3. Select the Image Quality tab.
4. Select the User TRCs FAB.
5. From the pull-down menu, select the User TRC you wish to
apply.
6. If desired, select [View Curves...]. The View window opens.
NOTE: You cannot edit TRC curves in this window. You must
create and edit user TRCs within Color Manager. You may,
however, print the TRC curves for future reference.
To print the TRC curves:
a. Click [Print]. The Print window opens.
b. If desired, select the [All] checkbox. Alternatively, you can
select one or more specific curves from the following:
Cyan, Magenta, Yellow, and Black.
c. From the pull-down, select the queue to which the TRC
print job is submitted. The job will be a single-page TIFF.
d. Select [OK]. The job is submitted to the appropriate queue.
7. When you are finished viewing and/or printing the TRC curves,
click [OK]. You are returned to the job properties tabset.
8. Select [OK] to save settings and exit the job properties tabset,
or [Apply] to save settings and continue setting job properties,
or [Cancel] to exit the tabset without saving your edited
P r o du c t N am e B o ok N am e