Xerox DocuColor 250 Online Help Manual page 108

About the Queue Manager
Queue Manager Main Window
Queue Properties
- 2
NOTE: If you decide to use a new language on the system, the
initial language change will prompt the system to ask you if you
want the three predefined queues renamed to the selected
language. Follow the displayed instructions.
The Queue Manager window displays all of the queues available
on the printer. Each queue can be thought of as a virtual printer
which has unique characteristics that are defined when the queue
is created. The queue list displays the name, priority, and state for
any queues available at the system.
Queue Manager is accessed by selecting the Queue Manager
icon located on the left side of the DocuSP GUI. The main window
will display the following:
• Queue: Name of the queue.
• Priority: Each queue for the printer is assigned a priority. The
priority informs the system the order in which the queues
should be processed. A queue's priority setting can be set
between 1 (highest priority) and 100 (lowest priority). The
default priority setting is 50.
• Accept: The column display will either be Yes or No. If Yes is
displayed the queue is enabled to accept new jobs for printing.
If No is displayed the queue is prevented from accepting new
jobs for printing.
• Release: The column display will either be Yes or No. If Yes is
displayed the queue will automatically print incoming jobs. If
No is displayed the queue can only print if it is manually set to
release or if the queue status is changed.
The Queue Properties dialog enables you to view and specify
parameters that are used as default settings to process all jobs
submitted to the queue. You can access queue properties by
performing one of the following:
• Double-click a queue.
• Select a queue and choose [Properties...] form the Queue
menu.
• Right-click a queue and select [Properties...].
• Select a queue and click the [Properties...] toolbar icon.
P r o du c t N am e B o ok N am e