Xerox DocuColor 250 Online Help Manual page 123

P r od u c t Na me Bo o k N am e
8. Select from the following processing options:
• Print and Forget: This option prints the job(s) and
removes any downloaded resource files from the printer
upon job completion. There are no deploy options for Print
and Forget.
• Deploy and Print: Deploys and saves the resource files
on the printer and prints the jobs. Deploy and print options
are described below.
– Replace Existing Resources: Resources
downloaded to the printer will overwrite resources of
the same name that already exist on the printer. If
Replace Existing Resources is not selected,
overwriting will not occur.
– Keep Print File: (Default): The print file is kept on the
printer. If Keep Print File is not selected, all but the
sample print file is deleted from the printer.
• Deploy Only: The resources in the VPC file are deployed
but the job(s) are not printed.
– Print List of Deployed Resources: A list of deployed
resources and their status is printed.
9. Select [OK] to save the currently selected values and exit the
GUI, [Reset] to reset the GUI options to their previously saved
values and keep the GUI open, or [Cancel] to reject new
changes, revert to previously saved values and exit the GUI.
VPC Filter limits, constraints and considerations
• The VPC Filter is not supported on single queue systems.
• The VPC Filter cannot be setup on a streaming queue.
• The General Filter Mechanism (GFM) does not provide a
method for stringing filters together and therefore, only one
filter can be applied to a queue.
• The DocuSP Job Forwarding feature is not supported.
• The VPC Filter is not supported in the DocuSP Remote
Workflow (DRW).
• All production type files contained in a VPC file are printed
when a VPC file is submitted to a VPC filter-enabled queue.
• A sample type file in a VPC file is only printed if there are no
production files contained in the VPC file.
• VPC files containing production jobs that use the VIPP
Demographics or Normalization features are not supported.
NOTE: The VPC Filter reports error codes (defined by GFM or the
filter) back to the GFM. Unexpected errors may be logged in either
/opt/XRXnps/log/GFM.Debug.Log or /opt/XRXnps/log/
vpcf.debug.log.
-17