Xerox DocuColor 250 Online Help Manual page 12

Compon Keyboard
ent Type Selection
Mode Control-D
Indicator
Status Control-P
Area
Control-N
Control-U
Control-A
Content Control-S
Area
Tab Pane Arrows
Control-Page
Up
Control-Page
Down
FABs Control-Shift-
Left Arrow /
Control-Shift-
Right Arrow
Tables Tab
Shift-Tab
Return/Enter
- 8
Puts focus on the first mode indicator, from which you can display the tool-
tip. This can include one or more of the following modes: MICR, Secure,
Job Fault, Diagnostic, Remote Workflow, and Logging.
Pauses the printer on production printer systems. Pauses the printer and
scanner on non-production printer systems.
Pauses the scanner on production printer systems.
Unload button
Clear All button. Available only on non-production printer systems.
Start button (Copy, Scan to Digital, and Print Services)
Moves between tabs.
Moves to the previous tab, preparing to enter the first available component
in the tab.
Moves to the next tab, preparing to enter the first available component in
the tab.
Moves the focus between a FAB and the first available element within that
FAB.
Moves focus one cell to the right. If the table cells are selected, the focus
should wrap, left to right, top to bottom and then back to the top of the
selected region.
Moves focus one cell to the left. With cell selection, Shift-Tab behaves
similarly to Tab, but in the reverse order.
Move focus one cell down, row selection follows focus. At the bottom of a
table, focus wraps to the top of a column. If more than one cell is selected,
the focus moves to each selected column in turn and then repeat from the
beginning.
Action
P r o du c t N am e B o ok N am e