Xerox DocuColor 250 Online Help Manual page 23
Xerox docucolor 250: reference guide
Hide thumbs
Also See for DocuColor 250:
- User manual (84 pages) ,
- Use manual (2 pages) ,
- Supplementary manual (191 pages)
Advertisement
Job Properties Window
P r od u c t Na me Bo o k N am e
NOTE: VIPP and PPML jobs cannot be viewed using this
feature; if you attempt to view these job types, an error
message displays.
•
Release: Allows the selected Held job to be printed. The job is
placed immediately after all printing or pending jobs.
•
Hold: If a job has been submitted to print and you wish to
delay printing of the job, you can place the job on hold. The job
will be moved to the Inactive Jobs list. When a job is held it
needs to process again before is can be printed. Printing starts
at the beginning of the job.
•
Promote: Promoting a job enables you to move the selected
pending job above all other pending jobs in the queue. The
promoted job prints immediately after other previously
scheduled print jobs.
•
Print Now: Interrupts a currently printing job to print the
selected job.
•
Proof: Prints one copy of the job and retains the job in the
system for additional printing. Proof jobs will interrupt any
currently printing job.
•
Forward: Allows you to forward a job from one DocuSP
system to a second DocuSP system.
•
Move: Allows you to move a job to another queue.
•
Delete: Terminates printing of the selected job and removes
the job from the system.
•
Cancel: Terminates printing of the selected job and removes
the job from the system.
NOTE: Selecting [Cancel] within the feature dialog windows
does not remove the job from the system.
•
Select All: Available within the Saved tab, once selected it
highlights all currently active or inactive jobs.
•
Clear All: Deselects all jobs currently highlighted in the Job
list.
•
Redisplay: This option refreshes the contents of the job list.
•
Sizing arrow buttons: The small arrow buttons located
immediately above the Inactive Jobs field allow you to adjust
the size of the Active or Inactive jobs fields. Click the up-arrow
to increase the display size of the Inactive jobs field. You can
also left-click on the arrow bar to drag and set the desired size
of the field.
The Job Properties window contains Feature Access Buttons
(FABs) that are incorporated within tabs and are designed to
-5
Advertisement
