Xerox DocuColor 250 Online Help Manual page 190

The Image Quality tab menus and fields
- 30
Administrator to set functions that will enhance the quality of the
printed image based on the type of file being printed and the fonts
being used. Fine details in an image and fine lines, can be difficult
for the printer to resolve. The Image Quality options are set for
each decomposer for each printer type. Settings can be modified
for printer darkness and for PCL, and PostScript/PDF Raster
Image Processors (RIP) and font rasterizers. Resolution options
vary by decomposer.
NOTE: If you do not have a valid PostScript license, the system
will not display a PostScript decomposer.
NOTE: TIFF properties do not contain unique settings for this
release of DocuSP and therefore, settings are not adjustable.
The Image Quality tab contains the following fields:
Image Quality tab menus
• The Raster Image Processor [Properties...] menu can be
accessed by performing one of the following:
– Double click a Raster Image Processor.
– Right-click a Raster Image Processor and select
[Properties...].
– Select a Raster Image Processor and select [Properties...]
from the RIP pull-down menu.
– Select a Raster Image Processor and select the
[Properties...] icon from the toolbar.
• View menu:
– Show Toolbar: Selecting this option displays an
assortment of tools that correspond to common tasks.
– Hide Toolbar: This option, which is only available when
the toolbar is displayed, will toggle the display of the
toolbar off.
– Redisplay: This option refreshes the contents of the
Raster Image Processor list.
• Raster Image Processors field:
– Type: Indicates the type of Raster Image Processor (RIP).
The selections are PCL, PostScript/PDF, or TIFF.
NOTE: If you do not have a valid PostScript license, the
system will not display the PostScript RIP.
NOTE: TIFF properties do not contain unique settings for
this release of DocuSP and therefore, settings are not
adjustable.
P r o du c t N am e B o ok N am e