Switches
Setting Administrative Pages properties
- 6
Exiting Power Saver
If the printer is in Low Power Mode or Sleep Mode, you can
immediately exit these modes by selecting [Exit Power Saver]
from the Printer menu, or by releasing a job for printing.
The Switches dialog enables you to control settings that vary
depending on which printing system you have. The Switches
options include the following:
•
Setting Administrative Pages properties
•
Setting the sides imaged
•
Setting the edge treatment option
•
Setting the audible alarm
Administrative Pages are optional pages that print with the job.
For the Banner Page and the Error Page you can select the
default paper stock, enter a Site Message, and select font options.
For additional information about using Administrative Pages at the
queue and job level see Using queue Administrative Pages, and
Using job Administrative Pages.
NOTE: The Attributes Report contains fixed font settings that are
not affected when selecting Administrative Pages properties for
the Banner Page and Error Page.
•
Banner Page: The Banner Page provides the following
information:
–
Job name
–
Job sender: The name of the person who sent the job.
This field cannot be edited.
–
Job recipient: The name of the person who will receive
the job. If you don't know the name, you may enter a
recipient location.
–
Banner page message: Information you want to be
printed on the banner page.
–
Printing date and time
–
Number of copies: The number of job copies that were
printed.
–
Product name and current software version level
–
Account number
–
Job ID: The job identification set at the controller.
P r o du c t N am e B o ok N am e