Xerox DocuColor 250 Online Help Manual page 298
Xerox docucolor 250: reference guide
Hide thumbs
Also See for DocuColor 250:
- User manual (84 pages) ,
- Use manual (2 pages) ,
- Supplementary manual (191 pages)
Advertisement
- 10
printing. The tab window contains a mimic of a printed page
that reflects the image shift changes you make.
3. Select the desired unit of measure (inches, mm).
4. Using the X axis and Y axis, enter a shift value by using the
arrows or by typing in a number.
•
When selecting the horizontal (X) image shift, enter a
positive number to move the image away from the left side
of the paper. Enter a negative number to move the image
away from the right side of the paper.
•
When selecting the vertical (Y) image shift, enter a positive
number to move the image upward or a negative number
to move the image down.
•
Use the Center option to bring both the X and Y values
back to zero (no shift).
Your selection will appear in the Summary field and on the Image
Shift FAB.
Shifting the image on two-sided jobs:
The software does not automatically adjust the image shift for two-
sided jobs. You must enter the specific requirements for a two-
sided job.
To shift the image on two-sided jobs:
1. Open the Copy service.
2. Select the Image Edit tab.
3. Click the Image Shift FAB.
4. The tab contains a mimic of a printed page that reflects the
image shift changes you make. Select from the following:
•
Independent: Select an independent vertical or horizontal
shift for both sides 1 and 2.
•
Mirror: The horizontal and vertical image shift for both
sides move in opposite directions from each other. Mirror is
best used for two sided jobs.
•
Mirror X only: The horizontal shift for both sides moves in
opposite directions. The vertical shift for both sides
remains independent.
•
Mirror Y only: The vertical shift for both sides moves in
opposite directions. The horizontal shift for both sides
remains independent.
•
Tandem: The horizontal and vertical shift move in the same
direction for both sides.
•
Tandem X only: The horizontal shift for both sides moves in
the same direction. The vertical shift remains independent
for both sides.
•
Tandem Y only: The vertical shift for both sides moves in
P r o du c t N am e B o ok N am e
Advertisement
