Lenovo ThinkEdge SE360 V2 User Manual page 95

a. Unlock the security bezel with the key.
b. Press the tab to disengage the security bezel.
c. Pivot the security bezel outward, and remove the security bezel.
Figure 70. Removing the security bezel
Step 2. Power off the server and peripheral devices and disconnect the power cords and all external
cables. See "Power off the server" on page
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not
turn off the electrical current supplied to the device. The device also might have more than
one power cord. To remove all electrical current from the device, ensure that all power cords
are disconnected from the power source.
Step 3. Remove the node sleeve from the DIN rail.
a. Lift the node sleeve slightly upward until the top side of DIN rail clips disengage from the rail.
b. Pivot the node sleeve outward to remove it from the rail.
54.
.
Chapter 5 Hardware replacement procedures
85