Table of Contents
Advertisement
Figure 356. Storing the wrench
• Complete the parts replacement. See
Install the WLAN antennas
Follow instructions in this section to install the WLAN antennas.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AooAU9z6S2EXObfHoLImDm
Procedure
Step 1.
Locate the corresponding connector to install the WLAN antenna.
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 48
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
324.
.
Chapter 5
Hardware replacement procedures
to ensure that you
321
Advertisement
Table of Contents
Troubleshooting
