Table of Contents
Advertisement
Figure 162. Top intrusion switch cable routing
Intrusion switch connector on the system board
1
Step 3.
Remove the intrusion switch.
a.
Loosen the screw that secures the intrusion switch.
b.
Pinch and slide the intrusion switch to remove it.
Figure 163. Removing intrusion switch with cable
Step 4.
Separate the bracket from the intrusion switch cable.
Figure 164. Separating the intrusion switch from the bracket
After this task is completed
ThinkEdge SE360 V2 User Guide
160
Advertisement
Table of Contents
Troubleshooting
