Table of Contents
Advertisement
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Depends on the operating environment, check the status of the dust filter at least every 3 months to make
sure it is functional.
SE360 V2 2U2N Enclosure supports a set of dust filters installed in the front shipping bracket. The dust filter
set has a Minimum Efficiency Rating Value (MERV) of 5, per ASHRAE 52.2-2017 / 80% Average Arrestance
per ASHRAE 52.1-1992.
Procedure
Step 1.
Insert the dust filters into the corresponding slots of shipping bracket until they are firmly seated.
Note: Depending on the configuration, some parts in the following illustration might not come with
the system.
Figure 89. Installing the dust filters
Step 2.
Push the shipping bracket toward the enclosure until it is firmly seated.
ThinkEdge SE360 V2 User Guide
96
and
"Safety inspection checklist" on page 48
to ensure that you
Advertisement
Table of Contents
Troubleshooting
