Ipv4 Setting; Set Dust Filter Measurement - Lenovo ThinkEdge SE360 V2 User Manual

Hide thumbs Also See for ThinkEdge SE360 V2:

Table of Contents

2. Click Forget to delete a WLAN connection from the list.

3. To exit the list, click Return.

IPv4 setting

If necessary, select one of the following methods and adjust the settings accordingly.

• Obtain IP from DHCP

• Use static IP address

• DHCP, then static IP address

With air flow sensor board installed, SE360 V2 BMC supports dust filter measurement feature to check the

status of the rear dust filter.

Measurement to take the measurement by selecting Run immediately (once), or by setting a regular

Note: When taking the measurement, the fans will operate at full fan speed for about 30 seconds.

Figure 365. Dust filter measurement

ThinkEdge SE360 V2 User Guide