Lenovo ThinkEdge SE360 V2 User Manual page 325

The blue cable (x x 8 8 6 6 W W L L A A N N # # 3 3 )
3
Step 6. Install the SMA assembly.
a. Align the notches of the SMA assembly with the guide pins on the chassis; then, carefully
lower the SMA assembly until it is firmly seated.
b. Secure the SMA assembly with one screw.
Figure 347. Installing the SMA assembly
Step 7. Route the cables.
a. For the cables of PMB side SMA assembly, secure the cables into the cable clip on the fan
cage; then, route the cables into the cable guide on the side of the chassis.
b. For the cables of processor side SMA assembly, route the cables into the cable guide on the
side of the chassis.
c. Secure the cables into the cable clip near to the wireless adapter.
The black cable (x x 8 8 6 6 W W L L A A N N # # 4 4 )
4
.
Chapter 5 Hardware replacement procedures
315