Table of Contents
Advertisement
Figure 303. Pivoting the cable holder
Step 5.
Remove the WLAN/Bluetooth module heat sink.
a.
Loosen the two captive screws that secure the heat sink.
b.
Lift the heat sink to remove it.
Figure 304. Removing the WLAN/Bluetooth module heat sink
Step 6.
Remove the WLAN/Bluetooth module.
a.
Press the retainer to disengage the WLAN/Bluetooth module.
b.
Lift up the front end of the WLAN/Bluetooth module at an angle.
c.
Remove the WLAN/Bluetooth module from the slot.
ThinkEdge SE360 V2 User Guide
290
Advertisement
Table of Contents
Troubleshooting
