Lenovo ThinkEdge SE360 V2 User Manual page 298

Figure 301. Removing the wireless adapter
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove the WLAN/Bluetooth modules
Follow instructions in this section to remove the WLAN/Bluetooth modules.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• If the node is installed in an enclosure or mounted, remove the node from the enclosure or mount. See
"Configuration guide" on page
Watch the procedure
ThinkEdge SE360 V2 User Guide
288
"Install the wireless adapter" on page
and "Safety inspection checklist" on page 48
54.
54.
294.
to ensure that you