Table of Contents
Advertisement
Figure 106. Removing the air baffle
Remove the processor air baffle and the air flow sensor board
Step 1.
Remove the processor air baffle with air flow sensor board.
a.
Gently pinch the air baffle as shown; then, lift the air baffle up.
b.
Disconnect the cable of air flow sensor board from the system board.
c.
Lift the air baffle out of the chassis.
Attention: For proper cooling and airflow, reinstall the air baffle before powering on the server.
Operating the server with the air baffle removed might damage server components.
ThinkEdge SE360 V2 User Guide
112
Advertisement
Table of Contents
Troubleshooting
