Step 2.
Separate the node bracket from the wall-mount plate.
a.
Loosen the eight screws that secure the node bracket.
b.
Slide the node bracket until the guide pins on the wall-mount plate are seated in the large
opening of the keyhole; then, remove the node bracket from the wall-mount plate.
Figure 57. Separating the node bracket
Step 3.
Loosen the eight screws that secure the two side brackets (four for each side bracket) to
disassemble the node bracket.
Figure 58. Disassembling the node bracket
ThinkEdge SE360 V2 User Guide
78