Table of Contents
Advertisement
Figure 202. Removing the MicroSD card
After this task is completed
• Install a replacement unit. See
"Install the MicroSD card" on page
196.
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install the MicroSD card
Follow instructions in this section to install the MicroSD card.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
ThinkEdge SE360 V2 User Guide
196
Advertisement
Table of Contents
Troubleshooting
