Table of Contents
Advertisement
Figure 155. Loosening the screws
Step 5.
Pinch the pull tapes to lift the internal power supply unit slightly up; then, pinch the edge of the
internal power supply unit and lift it up to remove it from the chassis.
Figure 156. Removing the internal power supply unit
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the internal power supply unit (AC PMB)
Follow instructions in this section to install the internal power supply unit (AC PMB).
ThinkEdge SE360 V2 User Guide
154
"Install the internal power supply unit (AC PMB)" on page
154.
Advertisement
Table of Contents
Troubleshooting
